全国咨询热线
手机：13823613629
电话：0769-82937713
q q ： 425675360
地址：东莞市常平镇桥沥村利氏工业区C10厂房一楼
In the production of re-silicone rubber products, according to the difference of process and equipment, it can be divided into two main categories: moulding and injection moulding. Molding method: the process of directly loading rubber or pre-formed semi-finished products into the die cavity, then pressing on the machine and heating vulcanization at the same time, so as to obtain the parts of the product. Its production process is as follows: rubber - shear weighing or other pre-forming - filling die cavity - pressurization, vulcanization - starting pick-up - repairing flash - finished product quality inspection. The method of moulding is widely used because the moulding die structure and the equipment used are relatively simple and versatile.
In the production of re-silicone rubber products, according to the difference of process and equipment, it can be divided into two main categories: moulding and injection moulding. Molding method: the process of directly loading rubber or pre-formed semi-finished products into the die cavity, then pressing on the machine and heating vulcanization at the same time, so as to obtain the parts of the product. Its production process is as follows: rubber - shear weighing or other pre-forming - filling die cavity - pressurization, vulcanization - starting pick-up - repairing flash - finished product quality inspection. The method of moulding is widely used because the moulding die structure and the equipment used are relatively simple and versatile.
移印硅胶成为胶头的“非凡过程”2021-08-12翻模硅胶硬度打样，硬度不对2021-05-20检验硅油是否导致硅胶冒油的“凶手”2021-05-07白色缩合型胶与半透明缩合型胶的异同点2021-03-01液体硅胶一点杂质都不存在，现实吗？2020-09-17液体硅胶硬度调节方法2020-08-31仰制翻模硅胶缩水率的小妙招2020-08-14高透型环氧树脂滴胶与液体胶的迥异2020-08-13
